Blog
Mason Jar Vacuum Sealer Kit: Smart 15W Wholesale Guide
Mason Jar Vacuum Sealer Kit: Smart 15W Wholesale Guide
At the 10,000-unit tier, UAH01H drops to $5.90 from $7.90 at 200 units—a $2.00-per-unit spread that can change a private-label launch budget before freight. A mason jar vacuum sealer kit is a cordless air-removal system; choose it by jar fit, verified performance, pack-out, instructions, and total program requirements.
// 01 — Key takeaways
Founded in 2005, Guilin Use at Home Technology Co., LTD operates a documented 15,000 m² facility with 205 workers; review the factory facts in our Trust Center.
The UAH01H mason jar vacuum sealer kit pairs its listed power with 60 kPa suction and 3.5 L/min ±15% flow.
The first-party record states about 100 uses per charge; approve that claim on the target lids.
Built-in small- and wide-mouth interfaces make lid compatibility the first sample check.
The opening published tier is $7.90 per unit, and the product carries a 12-month warranty.
// 02 — Range fit
What does UAH01H add to a wholesale range?
The UAH01H mason jar vacuum sealer kit adds a cordless, multi-accessory jar program rather than a single-purpose pump. It combines two jar-mouth interfaces, two operating modes, an LED display, external vacuum accessories, and a wine sealer. The commercial opportunity is a coherent storage kit whose lid fit and claims have been approved for one target market.
Which buyer problem does the kit solve?
The kit gives distributors one compact SKU for consumers who want to remove air from compatible jars, bags, and bottles. The featured product includes the hardware needed to demonstrate several storage formats without placing a full countertop sealer in the bundle.
That breadth also creates a specification task. The quotation, sample, manual, and carton must agree on every accessory. A broad product title cannot substitute for an exact packing list. Buyers should treat the mason jar vacuum sealer kit as a configured program, not a loose collection of parts.
Why is lid compatibility the first buying decision?
A pump can reach its stated suction while a mismatched rim still leaks. UAH01H lists 7 cm and 8.6 cm sealing widths, built-in wide- and small-mouth interfaces, and universal silicone rubbers. Those dimensions identify intended formats; they do not prove compatibility with every regional jar.
Because those dimensions describe intended formats rather than universal compatibility, record fit on the actual sales-market components. The sample-approval checklist below is the controlling method for jar, lid, cycle, and release checks.
What is the honest retail promise?
The mason jar vacuum sealer kit removes air from suitable containers. It does not heat-process food, sterilize contents, or create a universal shelf life. Good retail copy describes compatible containers, correct storage, and the included tools. It avoids turning an air-removal feature into a canning or food-safety claim.
This boundary improves the listing rather than weakening it. Buyers can sell portability, reusable-container support, two jar sizes, two modes, and the accessory set. Those are concrete product attributes that customer service can verify.
// 03 — Specifications
Which specs define this 15W jar sealer kit?
Use the table below as the single product-level specification reference for UAH01H. Read its electrical and airflow fields together with the listed jar interfaces, then carry only the approved configuration into the quotation, manual, and inspection record.
UAH01H verified specification sheet
Reviewed August 2026
| Catalog field | UAH01H value | Procurement meaning |
|---|---|---|
| Material | ABS + silicone | Identifies the listed housing and flexible interface materials. |
| Power | 15 W | Locks the product-level electrical rating used in the approval record. |
| Motor voltage | 7.4 V | Defines the listed motor configuration; charging input still needs market confirmation. |
| Battery capacity | 2000 mAh | Supports cordless use and the catalog statement of about 100 uses per charge. |
| Suction | 60 kPa | States nominal vacuum performance for a sound, correctly aligned interface. |
| Flow rate | 3.5 L/min ±15% | Adds air-removal rate and the published tolerance to the pressure figure. |
| Sealing widths | 7 cm / 8.6 cm | Maps the appliance to its listed small- and wide-mouth jar interfaces. |
| Controls | LED display; 2 sealing modes | Creates two user flows that the final manual must name and explain. |
How should 60 kPa and flow rate be read together?
Suction describes the pressure difference the system is designed to create. Flow describes how quickly air can move while the path remains open. Neither value guarantees a seal when a lid is warped, a rim is dirty, or the silicone interface is off-center.
Use one agreed jar set for sample comparisons. Record cycle outcome, not just whether the motor runs. If a supplier changes a lid, gasket, pump, or control setting, the approved result should be rechecked before bulk release.
What does “about 100 uses per charge” mean?
The UAH01H mason jar vacuum sealer kit record states about 100 uses from the 2000 mAh battery. This is the model’s catalog claim. It is not an independently timed endurance guarantee for every jar, mode, or retry pattern.
A buyer can make the claim testable by defining the charge state, interface, lid, mode, pause, and pass condition. This turns a marketing number into a repeatable sample requirement without inventing a test result or tolerance that the catalog does not provide.
Which charging details remain order-specific?
The product record identifies a 7.4 V motor but does not state a universal mains-input specification. Do not print an unsupported plug or input range on the carton. Confirm the supplied charging accessory, connector, adapter, labeling, and destination-market requirements in the approved quotation.
This is a useful sourcing rule: a missing figure should trigger confirmation, not a plausible substitute. The same applies to charge time, noise level, and any claimed cycle duration.
// 04 — Pack-out
What belongs in the approved kit and carton?
The mason jar vacuum sealer kit catalog includes vacuum bags, an external vacuum hose, a lid opener, a sealing lid, a suction cup, a food-saver sealing plug, and a wine sealer. The finished pack must match the signed sample because accessory count, retail-box space, instructions, and gross weight can all change when a buyer customizes the bundle.
Which accessories should the packing list name?
Name each component exactly and separate built-in functions from loose accessories. UAH01H has built-in wide- and small-mouth jar capability. Its listed loose bundle covers bags, hose, opener, sealing lid, suction cup, sealing plug, and wine sealer.
The purchase order should state quantities, material or color choices where relevant, and placement in the retail box. A photo sheet helps inspection teams distinguish similar-looking silicone pieces. It also makes translated manuals easier to follow.
What are the verified product and retail-pack dimensions?
The mason jar vacuum sealer kit measures 103 × 103 × 138 mm and has a net weight of 0.45 kg. The listed retail package is 107 × 107 × 145 mm with a gross weight of 0.5 kg. These catalog values provide the starting point for shelf planning and fulfillment checks.
A redesigned insert, thicker box, extra bag pack, or market adapter can change those numbers. Reweigh and remeasure the approved private-label sample before artwork carries a final dimension or logistics figure.
When should carton data be reopened?
Reopen pack-out approval when the accessory set, molded tray, manual, cable, carton board, label set, or unit color changes. The same rule applies when a destination requires an added compliance label or importer mark.
Keep catalog figures separate from freight quotations. Freight, duty, insurance, and local handling depend on route and order. The product record supplies verified product and pack-out facts; it does not supply a landed-cost promise.
// 05 — Commercials
How do four price tiers change the buying decision?
The four published quantity breaks are consolidated in the table below. Choose among them by balancing unit cost against inventory exposure, customization scope, and launch evidence; the written quotation must define what the selected configuration includes.
What are the published UAH01H quantity breaks?
| Published quantity | UAH01H price per unit | Buyer checkpoint |
|---|---|---|
| 200 units | $7.90 | Opening catalog tier and featured-model MOQ. |
| 500 units | $7.50 | Confirm whether artwork and accessories remain unchanged. |
| 1,000 units | $7.20 | Lock inspection sampling and replenishment plan. |
| 10,000 units | $5.90 | Validate demand and production release schedule. |
The unit-cost benefit grows with volume, but the largest order is not automatically the best launch. A smaller release can protect cash and expose support or packaging issues before a deeper commitment.
How does verified sibling UAH11HX differ?
We fetched UAH11HX directly before using its figures. It is a smaller 3 W handheld model with 60 kPa suction, a 1200 mAh battery, and 2 L/min ±15% flow. Its first published tier is 10 units at $4.40. Those values belong only to UAH11HX.
| Verified model | Range position | Technical distinction | Commercial reference |
|---|---|---|---|
| UAH01H | Featured multi-accessory kit | Use the specification sheet above | Use the four-tier table above |
| UAH11HX | Compact entry model | 3 W, 60 kPa, 1200 mAh, and 2 L/min ±15% | $4.40 at 10 units |
Which model creates the clearer assortment?
UAH01H supports a richer kit story: two modes, LED display, 2000 mAh battery, about 100 uses per charge, and a broad accessory bundle. UAH11HX offers a lower opening quantity and a lighter technical configuration. They should occupy different range positions rather than share blended claims.
Compare the approved samples, not only the tables. Select the kit for the intended retail promise, accessory set, and order scale, using the documented fit check before committing to production.
// 06 — Safe claims
Can brands call vacuum-sealed jars shelf-stable?
No. A mason jar vacuum sealer kit removes air but does not apply the validated heat process needed for shelf-stable canning. Brand instructions should separate dry-food storage from perishable-food storage, preserve normal refrigeration or freezing requirements, and avoid fixed shelf-life promises unless the exact food, process, container, and temperature have supporting evidence.
Can a mason jar vacuum sealer replace canning?
The University of Minnesota Extension answer on vacuum-sealing mason jars says the device does not replace boiling-water, atmospheric-steam, or pressure canning. It creates no heat treatment. A held-down lid is therefore not proof that the contents are shelf-stable.
Put that boundary in the manual and product listing. Avoid hot-food imagery that implies a processing step the appliance cannot perform. Customer-service scripts should repeat the same rule.
What foods make sensible demonstrations?
Dry herbs, spices, grains, legumes, nuts, seeds, and properly dehydrated produce give retailers clear demonstrations. The National Center for Home Food Preservation guidance for dried foods identifies vacuum packaging as an option and stresses clean, dry containers plus cool, dry, dark storage.
Moisture is a key boundary. Warm dried food can sweat inside a jar. Condensation is a reason to stop, inspect, and follow research-based drying guidance rather than assuming the vacuum solved the problem.
Why does reduced oxygen change the warning language?
The FDA Food Code definition of reduced oxygen packaging includes vacuum packaging and describes pathogen controls for time/temperature-control foods in retail establishments. A consumer jar accessory is not permission to bypass those controls.
Instructions should tell users that foods requiring refrigeration before sealing still require it afterward. The device can support quality-focused storage. It cannot convert an unsafe temperature practice into a safe one.
How long will food last in a vacuum-sealed mason jar?
There is no honest universal duration. Food type, starting moisture, cleanliness, temperature, jar condition, lid condition, and reopening frequency all matter. Use established storage guidance for the specific food and discard contents with spoilage, leakage, a lost seal, or uncertain handling.
This answer is less dramatic than a multiplier, but it is defensible. Buyers should reject unsupported “lasts X times longer” copy unless the claim is backed by a defined test that matches the marketed use.
// 07 — Sample approval
How should buyers approve the UAH01H sample?
Approve the mason jar vacuum sealer kit sample with the exact jars, lids, accessories, charging setup, artwork, and instructions planned for sale. The record should identify the chosen interface and mode, define a successful lid result, count completed cycles from a known charge state, and document pack-out. This makes later production inspection specific rather than subjective.
Which jars and lids should be sent to the factory?
Send the dominant jar formats from the destination market, including both intended mouth sizes. Add dimensioned references when possible. If reused lids will be shown in marketing, include representative used examples and define when a lid must be discarded.
Inspect glass for chips and cracks before every test. Clean and dry the rim. Keep powder, liquid, and food fragments away from the air path. These preparation rules belong in the consumer instructions as well as the factory checklist.
What should the cycle record capture?
Record the jar, lid, interface, selected mode, starting charge condition, cycle completion, lid hold, release method, and any retry. Note visible damage or deformation. A simple sample log can reveal whether failures cluster around one lid batch or setup error.
Do not create an unstated acceptance percentage or endurance claim. Agree the method first, collect the results, and place the approved requirement in the inspection document only after buyer and factory review.
What must appear in the private-label manual?
The manual should show compatible interfaces, correct alignment, two-mode operation, charging, cleaning, seal checking, safe release, storage limits, and the canning boundary. Images should match the supplied accessories and final housing.
Add warranty and contact routing. Translate warnings for the destination market. If the charger, lid set, silicone part, or mode label changes, revise the manual before production instead of relying on an old artwork file.
// 08 — Manufacturing
How we build a private-label UAH01H order
A private-label mason jar vacuum sealer kit order moves through tooling and sample control, pump and electronics checks, jar-seal and pack-out inspection, then compliance and warranty review. The approved bill of materials, lid set, accessory list, artwork, instructions, and test method stay linked so a cosmetic change does not quietly alter the functional configuration.
In-house tooling and private-mould control
Housing, silicone interfaces, color, logo position, surface finish, and fit-critical parts are checked against the approved sample and drawing. A requested mould or material change receives documented review before the release package is updated.
Pump and PCBA burn-in
Motor, pump, display, controls, charging, and battery behavior are covered by the order’s agreed inspection plan. Test duration and sampling stay in the buyer-approved record; no unsupported burn-in number is claimed here.
Seal integrity and pack-out quality control
Production checks use the approved jar and lid references. Inspectors confirm mode operation, air removal, interface condition, accessories, labels, cosmetic finish, and retail-pack arrangement before master-carton release.
CE and RoHS names plus 12-month warranty
CE and RoHS are the relevant certification names documented for export programs; applicable scope and destination requirements are confirmed per order. UAH01H carries a 12-month warranty, with service routing stated in the sales agreement and manual.
// 09 — B2B program
Who is the UAH01H best suited to?
UAH01H best suits distributors, specialty-storage retailers, private-label brands, and food-dehydration accessory programs that can complete the documented sample review before launch. Use the earlier specification sheet and commercial table as the reference points rather than repeating them in the program brief.
Why can it work for distributors?
The product gives distributors several demonstrable storage formats in one range position. Use the earlier pack-out section for dimensions and carton data, and train support staff from the approved manual so fit, setup, and storage questions follow one documented answer.
What can a private-label buyer customize?
The product record supports OEM, ODM, and private-label work. Logo, color, packaging, and bundled accessories can be configured. Each requested change needs an artwork revision, sample sign-off, packing-list update, and commercial confirmation.
The legal company name is Guilin Use at Home Technology Co., LTD. The market-facing brand is Vacuum Food Sealers China, and its niche is vacuum food sealers and sealing supplies. Keep those entities consistent across the purchase order, manual, carton, and product listing.
Which commercial terms are cataloged?
Use the commercial table above as the catalog baseline. The written quotation must control the final configuration, quantity, production timing, delivery basis, payment schedule, inspection, and warranty routing.
Which destination-market details need confirmation?
Supply the destination market before sampling and confirm its charging hardware, labels, instruction language, importer details, recycling marks, compliance scope, barcode, carton marks, and warranty contact. For the unresolved electrical inputs, follow the confirmation rule in the specification section.
// 10 — Questions
Mason jar vacuum sealer kit FAQ
Buyers most often ask how the lid is held, whether vacuum sealing replaces canning, which foods fit the use case, whether both jar-mouth sizes work, how long the battery runs, and where wholesale pricing begins. These answers distinguish verified UAH01H catalog facts from food-safety guidance and sample-dependent results.
How do vacuum-sealing mason jars work?
Can a mason jar vacuum sealer replace canning?
What foods can be stored in vacuum-sealed mason jars?
Does UAH01H fit wide- and small-mouth mason jars?
How many uses does the UAH01H battery provide per charge?
What are the UAH01H MOQ, price tiers, and lead time?
// 11 — Decision
Is UAH01H the right wholesale kit?
UAH01H is the right candidate when its documented feature set fits the planned range and a sales-market sample passes. Review the specification sheet, commercial table, and approval checklist; proceed only after claims, pack-out, charging, artwork, service, and order terms are recorded.
Featured mason jar vacuum sealer kit
The live UAH01H product record is the first-party source behind this guide. Check the listing, use the detailed tables above for evaluation, and request a destination-specific quotation.
Featured product
UAH01H Vacuum Sealer Kit
Review the verified specification sheet
Similar products
Вакуумный укупорщик для банок Mason Jar, сила всасывания 60kPa, 2000mAh
Mason Jar Vacuum Sealer, 60kPa Suction, 1200mAh
El Tipi Vakum Makinesi, 15W, 60 kPa, Mason Kavanoz
What should an RFQ include?
Send the target country, planned quantity, annual forecast, jar and lid samples, preferred color, logo file, packaging language, exact accessory list, charging requirement, compliance scope, inspection expectation, and launch date. This gives the product team enough detail to return a useful quotation instead of an unverified estimate.
Ready to configure a wholesale jar-sealer kit?
Vacuum Food Sealers China manufactures vacuum food sealers and sealing supplies through Guilin Use at Home Technology Co., LTD. Share your market, jar formats, and volume for an OEM, private-label, or B2B quotation.
Related Articles
UAH27GX Roll Storage: Bag-Cutting Workflow for Buyers
Assess the UAH27GX roll-storage and bag-cutting workflow, specifications, model comparison, acceptance checklist, pricing, cartons, and OEM order fit.
Read more →
75 kPa Cordless Vacuum Sealer: What Buyers Should Test
A buyer-focused assessment of UAH02C covering 75 kPa suction, 12 L/min flow, a 30 cm seal, charge testing, catalogue pricing, and OEM…
Read more →
120W Vacuum Sealer: What 65 kPa and 30 cm Change for Buyers
Use this UAH54G buyer brief to weigh 65 kPa suction, a 30 cm seal bar, wet and dry modes, catalog tier prices,…
Read more →
